Mytek Digital Stereo192-DSD DAC Black Mastering Version
The Mytek Stereo192-DSD Digital to Analog Converter is an ultratransparent mastering grade digital audio playback system. Designed around state of the art Sabre 32 bit conversion technology, the Stereo192-DSD DAC delivers features and sound quality beyond expectations of the most discerning listener.
Mytek 8×192 ADDA (x2)
8X192 AD/DA is a flagship Mytek hi-performance mastering converter which offers PCM A/D and D/A conversion for all sampling rates from 44.1k to 192k.
Lynx Aurora 8-HD
The Aurora™ line of digital audio converters from Lynx Studio Technology offers unprecedented audio quality and control in single-rack space.
Digidesign 96 i/o
The Digidesign 96 I/O™ 16-channel digital audio interface features 24-bit analog-to-digital (A/D) and digital-to-analog (D/A) converters. The 96 I/O supports sample rates of up to 96 kHz for superior dynamic range and low noise floor.
Dangerous 2-BUS (16>2 Summing mixer)
The Dangerous 2-Bus 16X2 summing device puts that all back into a lifeless mix. Much like traditional vintage consoles brought together multiple channels of audio, the 2-Bus receives 16 analog outputs from any DAW interface and combines them to stereo. This is its sole purpose and it performs more transparently and musically than any other solution.
Long Micromix-8S (8>2 Summing mixer)
MICROMIX 8S is the first Truly & Fully Stereo Mixer. Stereophonic from ALL inputs to ALL outputs, including AUX and INSERT!
Ghielmetti CSF 1×48 AV 3/1 D25Tff patchbay (x2)
The Ghielmetti self-cleaning double gold contact system guarantees a high secure connecting system over live time.
Coleman Audio M3PH MKII Passive DAW Monitor Controler
Designed to be the control room monitor source selector. This unit’s control room signal path is completely passive, with a four gang stepped attenuator, that tracks within ±.05dB. This ensures accurate, and repeatable stereo imaging at any level. Individual mute switches allow speaker isolation and a phase reverse switch helps you check the integrity of the audio path.
A four input source selector and three balanced outputs provide numerous monitoring options in any application.
Spendor SP100R
Description
|
3-way stand mounting loudspeaker
|
Enclosure type
|
Reflex
|
HF drive unit
|
19mm soft dome with fluid cooling
|
MF drive unit
|
Spendor 160mm polymer cone
|
LF drive unit
|
Spendor 300mm bextrene cone
|
Sensitivity
|
89dB for 1 watt at 1 metre
|
Crossover point
|
550 Hz, 5 kHz
|
Frequency response
|
45 Hz to 20 kHz ± 3dB anechoic
|
Typical in-room response
|
-6dB at 35 Hz
|
Impedance
|
8 ohms nominal
|
Impedance minimum
|
5.5 ohms
|
Power handling
|
200 watts unclipped programme
|
Terminals
|
Gold 2/3 way binding posts bi-wired
|
Cabinet (HxWxD)
|
700 x 370 x 430mm
|
Finish
|
black |
Weight
|
36 kg each
|
Gryphon M100 Monoblock Power Amplifier (x2)
Event TR5
The Event Tuned Reference TR5 Active Monitors feature the same tweeter and driver as Event’s super-popular Project Studio 5. The 25mm soft-dome neodymium tweeter and 5.25″ mineral-impregnated polypropylene driver are coupled with a powerful amp that delivers clean, clear, flat sound via an active second-order crossover. Magnetically shielded. Protection circuitry for RF interference, output current limiting, over temperature, and turn off/on transients. Balanced XLR and 1/4″; unbalanced RCA inputs. Power on and clip LEDs. 53Hz-19kHz frequency response.